FGV1248-LED maintenance-free energy-saving explosion-proof flood light for ZONE 2,21 AND 22

Explosion-proof lights  ZONE 2,21 AND 22

Product Features

1. The explosion-proof type of this lamp is gas explosion-proof composite type or dust explosion-proof type, which is suitable for road lighting in gas or dust explosion hazardous places.

2. The lamp is mainly composed of an n-type light source module, a composite electrical cavity, and a mounting bracket. The lamp housing is made of aluminum alloy, and the outer surface is sprayed with polyester powder.

3. Modular combination structure, built-in potting LED driver, adapt to users’ different power requirements.

4. The combination of finned heat dissipation and full structure heat dissipation, efficient heat dissipation and significant effect

5. High-quality LED light source combined with constant current drive technology, complete functions, reliable performance and long service life.

6. A variety of beam angles of the module PC lens are available (default 60 °) to meet different lighting requirements. A variety of LED color temperatures are available.

7. The lamp has the advantages of good corrosion resistance, high luminous efficiency, wide irradiation range, durability, energy saving and maintenance free.

8. The lamp is a bracket type, which can be used for bracket type, wall suction or pole type installation. The lamp can adjust the projection direction of the lamp within a certain range.

9. The lamp is suitable for the entry of explosion-proof noise-proof pipes or three-core rubber sheathed flexible cables.

10. This lamp uses LED light source. The light source has the advantages of energy saving, long service life, high luminous efficiency, and good shock resistance. It is maintenance-free for long-term use.

Scope of application

Applicable to IIA, IIB, IIC environments containing explosive gases or vapors, temperature group T1 ~ T6 in indoor and outdoor hazardous locations or flammable dust environments. The minimum ignition temperature of a certain thickness of dust layer is higher than the required 21 Area, area 22 area flood lighting.

Product parameters:


1. Carry out GB3836.1, GB3836.8 and GB3836.9 “Explosive Environment Part 1, 8, 9) (equivalent to IEC 60079 and EN series standards). GB 12476.1, GB12476.5 “Electrical equipment for flammable dust environment-Part 1, 5” (equivalent to IEC 61241 and EN series standards).

2. Explosion-proof mark: Ex nR II CT 6 / T5Gc;

Ex tD A21 IP65 T80 ℃

3. Rated voltage: 220VAC  50 / 60Hz

4. Applicable power supply voltage: 180-260VAC 50 / 60Hz

5. Light source power: 50W, 60W, 100W, 120W

150W, 180W, 200W, 240W


6. Applicable light source: LED

7. Average beam angle: 30 °, 60 °, 90 °, 120 °

8. Enclosure protection level: IP66

9. Anticorrosion grade: WF2

10. Applicable ambient temperature: -20 ℃ ~ + 40 ℃ / + 50 ℃

11.Inlet: G3 / 4 ”(default) or M20 cable inlet

12. Cable outer diameter: φ9-φ12.5mm