dFH220-L Explosion proof helideck floodlight 15W

It is installed on the outer edge of the helideck surface as the auxiliary lighting of the whole helideck, and is used for the helideck less than 16 meters.

Application

-It is installed on the outer edge of the helideck surface as the auxiliary lighting of the whole helideck and is used for the helideck less than 16 meters.

Features

1. The shell material is 316L stainless steel;

2. Surface seat installation, height<50mm;

3. The chip LED light source with high luminous efficiency, long life, and environmental protection is adopted;

4. It has enough brightness and will not cause the pilot to have a visual black hole effect;

Layout rules:

Each helideck uses four floodlights, which are installed according to the layout recommended in CAP437 – 2016, to further reduce the risk of visual black hole effect for pilots;

Important:

Before the application of H light and TD/PM light, the function of the deck floodlight is to illuminate the H and yellow circles. This light is on and off with other lights. After April 1, 2018, this light is used for deck auxiliary lighting. During helicopter takeoff and landing, the ground crew shall follow the instructions of the pilot or crew to turn on or off the lights.

Standards and certificates

IEC 60598-1 IEC 60092-306 IEC 62722-2-1 GD03-2008 GB 7000GB 3836 GB 12476 GB 19510.1 GB/T 2423.18 GB 4208 CAP 437 (2018)

ICAO Convention Annex 14 Volume – (Eighth Edition)

The product has obtained China’s national explosion-proof certification

The product has passed CCS-type approval of the China Classification Society